gauss meter calibration

TECHNICAL PARAMETERS Electrical parameters　 Accuracy 0.05%, 0.1%, 0.2% Power supply 220V ± 10% or 110V ± 10%, 50/60Hz ± 2Hz Test Voltage　 Range 0V-600V Error ±0.05% (30V-600V) ±0.1% (5V-30V) Harmonic 2nd-63st Test Current　 Range (direct connection) 20mA-...

KE8302M-1000 1000A Three Phase Meter Test Equipment KE8302M-1000 is used for testing and calibration of single / three phase clamp CT meter, including on-site installed meter and portable standard meter. Product highlights: Auto protection of short circuit...

...meter calibrator The equipment is compliance with national verification regulation: JJG124－2005 “Ammeter, voltmeter, power meter and resistance meter verification rules” and related national standards. 0.05 single-phase AC/DC standard source, can verify magnitude 0.2 and the following AC/DC voltmeter, ammeter, frequency meter, resistance meter...

Three Phase Standard Electricity Meter Calibrator with 0.05% Accuracy Class Customized Product Description YC98S1 Portable Three Phase Standard Meter Features & Functions 0.05% High accuracy(direct connection) With 7 inch 480x234 dot TFT color screen Wide ...

... Main Unit Weight 0.4kg Accessories Current Clamp Voltage Test Lead Optical Probe Suitable for electronic and mechanical meters Communication Cable(Optional)

TYPE: MG-2 MAGNETIZING FIELD STRENGTH INDICATOR INSTRUCTION FOR USE 1. SCOPE TYPE MEASUREMENT RANGE (GAUSS) ACCURACY SIZE (mm) MG-5 50-0-50 +/-10% 60mm DIA. X23mm Our Service 1. Our company's product can be repaired free of charge within two year. Also...

High Precision Temperature Calibration Bath Our calibration baths from PANRAN are ideal for calibrating temperature probes, temperature transmitters or even complete temperature systems. They allow simultaneous calibration of multiple systems with the ...

SZ-03A-K6 High Precision Three Phase Energy Meter Calibrator Customized OEM Manufacturer Specifications SZ03A-K6 Test Voltage Range 30V – 480V Error ±0.05% (30V – 480V) ±0.1% (...

...Calibrating PH Meters : Use Directions Of PH Standard Solutions For Calibrating PH Meters : Completely empty the powder into a clean 250ML glass beaker,add 250ML deionized water to this beaker,stir unitl the powder is completed dissolved. PH Standard Value Form For PH Standard Solutions For Calibrating PH Meters...

YC1893D-12 Three-phase Three-wire Meter Verification Station for Electric Equipment Product Description YC1893D Three Phase Meter Test System Features& Functions Meters under testing:3P4W,3P3W Testing mode:active power,reactive power,cross connected ...

Three-phase Three-wire Electric Equipment YC1893D Three Phase Meter Test Bench with ICT Product Description Features& Functions Meters under testing:3P4W,3P3W Testing mode:active power,reactive power,cross connected reactive power Installing the ICT in ...

TECHNICAL PARAMETERS Electrical parameters　 Accuracy class 0.05%, 0.1% Resolution 6”TFT (640×480) Power supply 220V±10%, 50/60Hz Li-polymer battery (size (mm): 110x51x16, nominal output voltage: 7.2V, capacity: 5000mAh) Power line supply (U1, UN), 85V-265V...

1.Electrical parameters　 Accuracy class 0.05%, 0.1% Display 6”TFT (640×480) Power supply 220V±10%, 50/60Hz Li-polymer battery (size (mm): 110x51x16, nominal output voltage: 7.2V, capacity: 5000mAh) Power line supply (U1, UN), 85V-265V 50/60Hz Communication...

ZX5080 Three-phase AC Standard Power Source Product introduction ZX5080 Three-phase AC Standard Power Source adopts meter source integrated structure, full digital closed-loop standard source technology, embedded system, large screen TFT color LCD, CPLD ...

ZX1030A Single Phase AC Power Standard Source Product introduction ZX1030A Single Phase AC Standard Source is suitable for the inspection of all kinds of single-phase watt-hour meters below 1.0 and below. It is favored by the majority of users due to its ...

Poly Phase Stable Portable Meter Test Equipment for Active and Reactive Energy Meter Verification Features & Functions Supports DLT-645(2007)communication protocol,and can complete demand indication error,demand period error, time switching error, rate ...

...Meter Test Machine for Measuring Needs YC98S1 Portable 3 Phase Standard Meter The instrument YC98S1 is used to calibrate three phase, single phase, active or reactive energy meter who comply with GB/T17215.211 (IEC62052-11), GB/T17215.311 /321/322/323 (IEC62053-11/21/22/23), and also it can be used as voltage, current and power meter...

Portable Single Phase Meter Test Equipment UTI-1S 1. In-built Standard Reference Meter (SRM): accuracy class 0.05 or 0.02 (optional) 2. Error test, start test, creep test, dial test..etc 3. Measurement of volts, current, p.f., power, frequency, phase angle...

Portable Single Phase Meter Test Equipment UTI-1S 1. In-built Standard Reference Meter (SRM): accuracy class 0.05 or 0.02 (optional) 2. Error test, start test, creep test, dial test..etc 3. Measurement of volts, current, p.f., power, frequency, phase angle...

KE8101 single phase meter test equipment is used for the test of various single phase electric and mechanical meter, multi-function meter, PLC meter, multi-rate meter and prepayment meter. Features: • Integrated / Separated aluminum alloy structure, light...