standard current transformer

...Transformer Testing Equipment High Accuracy CT/PT Standard Current Transformer Product Description The device can test transformer with accuracy level lower than two or two less level than this device. Technical Parameters Working temperature: -5℃~+40℃ Humidity: <80 Capacity: 5VA Power factor: COSφ=0.8-1 Allow long-term work at rated current and straight-through at above 150A Weight: <20KG Standard current...

...Current Transformer for I-P close link meter ratio 1:1 KE6322 Isolation current transformer KE6322 is a two phase 1:1 current transformer, which mainly used to test I-P close link meter. It has high accuracy and compact size. Features: High accuracy through active electronic error compensation. Direct perforated installation Wide current...

... accuracy level. It is composed of primary winding and secondary winding. When wiring, strictly refer to the current ratio given by the wiring board for wiring. L1 and K1 are the polar ends of the primary and secondary windings respectively, and La is the

Standard CT Rated primary current : 5A-1000A,5A-2000A,5A-3150A,5A-5000A (or other rated primary current value ) Reference value of rated primary current (A): 5,7.5,10,12.5,15,20,25,30,40,50,60,75,80,100,120,125,150,160,200,250,300,315,350,400,450,500,600,630,750,800,900,1000,1200,1250,1400,1500,1600,1800,2000,2500,3000,3150,4000,5000 Rated secondary current...

...Current Transformer Clamp On Current Transformer Description : MR model Current Transformer is A range of (6 standard silicon steel core models) tape wrapping current transformer, low cost, widely used in southeast Asia. It can be used with or without foot and plastic cover. Advantage: 1. Small size, 2. high accuracy, 3.good consistency, 4. for current and power measurement Specifications Primary current...

...Current Transformer Indoor High Permeability Core 1. Introduction: The current transformer is wound block type casting insulated indoor type product. It is used for measuring current,standardization,isolation,electricity power and relay protection in the AC line or rated frequency 60Hz, rated voltage 720V and below. The current transformer can be executed according to the standard...

... On Current Transformer IEC60044-1 Standard 12' phase error GFUVE ELECTRONICS is one of the leading clamp on current transformer manufacturers China, welcome to import cheap and discount clamp on Current Transformer from us. Clamp-On Current Transformer...

...Current Transformer 1.rated insulation level: 12/42/75kV 2.rated frequency: 50/60Hz 3.burden power factor): COSØ=0.8 lagging 4.technical standard accords with):outdoor 5. technical standard according with:IEC60044-1:2003 2. Specification rated transformation ratio(A) Accuary classes combination rated output(VA) (ALF) (FS) short-time thermal current Ith(kA/S) rated dynamic current...

... Technical parameter ADL100-EY Voltage Reference voltage 3*220/380V Reference frequency 50Hz Consumption <4VA(Each phase) Current Input Current 1(6)A,10(80)A Starting Current Connect directly: 0.004 Ib, connect via

...Current Transformers DIP Power Inductors 1.Product Description A DIP (Dual In - line Package) Current Transformer is a highly practical electrical component widely used in various electrical systems. This type of current transformer features a dual in - line package design, which makes it convenient for installation on printed circuit boards (PCBs). With its compact and standardized...

...current transformer / MFO current transformer: 1.Model:MSQ-30,MSQ-30B,MSQ-30T,MSQ-40,MSQ-60,MSQ-85,MSQ-100,MSQ-125 2.Standard:IEC60044-1 3.Certificate:ISO9001:2000, ISO14001:1996,CE 4. Professory transformer manufacturer Specifications 1.Rated current:5/5A-6000/5A, 2.Secondary current...

...Current Transformer Product Details LMZJ1-0.5 current transformer is mainly used indoors, especially used in AC circuit with the rated voltage up to 0.5kV and rated frequency of 50Hz for current, energy measurement or relay protection purpose. As a casting current transformer, it is installed by fixing the base plate. This product conforms to IEC60044-1 and GB1208-2006 standard...

... magneitc field interference • Measure the current directly • It is with the diode to save people's life • Meet the ROHS requirement • High accuracy at 10-130% of rated current • AC isolation resistance: 3KV for 60s • Swing open for ease of

... 500mA output Current Transformer Description Split core AC current sensors have different hole sizes and current ratings to suit any application. Split core models are perfect for retrofits. Output is fixed at the industry standard . Application • Data ...

...Current Transformer 0.3A 3kV for Relay Protection Description: This type of current transformer is used indoor to measure the current and energy and perform relaying protection in AC circuit rated voltage up to 660V and rated frequency 50/60hz. The item is designed into moulded case protection structure and widely applied to complete cabinet body. This product performance is in accordance with the standard...

...Current Transformer Test Set for Portable Reference Standard Features & Functions Can be used for on-site verification of current and electromagnetic type voltage transformer ratio difference and difference, and also can measure ratio difference and angle difference of any percentage between 1% and 200% of the current; can be used to measure the ratio and polarity of transformer...

... transformer and voltage transformer at rated burden and working burden in one time test. CPT-I Current Transformer Tester can automatically evaluate the test results according to the selected standard to determine whether the transformer is qualified.

...), 5. Environmental protection( EU RoHS). 6. Small size and light weight 7. Easy to assemble and weld Guideline: National standard gb 1208-2006; Industry Standard jbt 10665-2006. Use Temperature:-25℃-+85℃ Relative humidity:≤95% Scope of application: